Friday, August 29, 2008

Joint Light Tactical Vehicle (JLTV), USA

Joint Light Tactical Vehicle (JLTV), USA (NSI News Source Info) August 29, 2008: The joint light tactical vehicle (JLTV) is a new support vehicle programme being developed by the US forces, specifically the US Army, USSOCOM, and the Marine Corps to replace the rapidly ageing and outmoded high-mobility multipurpose wheeled vehicle (HMMWV), the design of which is over 25 years old.
The concept joint light tactical vehicle prototypes will be tested in 2012. The JLTV variations are based on three joint functional concepts. The joint light tactical vehicle will have two armour configurations. The joint light tactical vehicle will have two armour configurations. The JLTV will have two run-flat tyres and other systems to allow continued operation after sustaining small-arms fire.
The new JLTV vehicle range is expected to confer more survivability from insurgent attacks such as road-side bombings and will also have a greater payload. The HMMWV was not designed from the outset to be an armoured combat and patrol vehicle but nevertheless has been employed as one. In contrast the JLTV has been specifically designed for patrol and combat operations. The JLTV project has been able to benefit from some of the knowledge gained during the future tactical truck system (FTTS) project. The JLTV range will contain five armoured versions including infantry combat vehicles, command vehicles, reconnaissance vehicles, and armoured utility vehicles. There will probably also be an armoured personnel carrier and a number of other non-armoured versions for other purposes such as ambulances, utility vehicles and general purpose mobility. Joint functional concepts According to the brief there will be three major variations of the JLTV. These are categorised according to the payload of the vehicle and the general mission requirement but there may also be other variants if required. The general categories (joint functional concepts) are 'battlespace awareness' (BA), 'force application' (FA) and 'focused logistics' (FL). All of these have to be transportable by CH-47 and CH-53 helicopters and also C-130 aircraft. There are three payload capacity categories A, B and C which correspond to 3,500lb (1,600kg), 4,000lb to 4,500 lb (1,800kg to 2,000kg) and 5,100lb (2,300kg) respectively. The lower payload will be for the BA category for use as general purpose utility vehicles with a four personnel capacity. The mid payload capacity is for the FA category used as a six-seat infantry carrier (carrying a small fire team), reconnaissance scout (six seats), reconnaissance knight (six seats), command and control on the move (four seats), heavy guns carrier (four seats and a gunner position), close-combat weapons carrier (four seats), utility vehicle (two seats) or an ambulance (three seats and two litter beds). The higher payload is for the FL category used as shelter carrier / utility / prime mover (two seats), high-capacity ambulance (three seats and four litter beds). Companies involved in the JLVT project There are several companies involved in the development of the JLTV project with several joint efforts having been established including Northrop Grumman and Oshkosh Corp, General Tactical Vehicle, a joint venture between AM General and General Dynamics Land Systems, Lockheed Martin and BAE (formerly Armor Holdings), BAE Systems and International Military and Government LLC, an affiliate of Navistar International Corporation (International Military and Government LLC is a wholly owned subsidiary of International Truck and Engine Corporation), Boeing, Textron, SAIC, DRS Sustainment Systems Inc and Force Protection Inc. "The new JLTV vehicle range is expected to confer more survivability from insurgent attacks." The three contract awards for development of JLTV prototypes will be in October 2008 with a JLTV system development demonstration phase planned to begin in 2012. After this two contractors will complete the design and development of the JLTV FoV (family of vehicles) and companion trailers and then compete to produce the multiple JLTV variants. The MRAP-mine-resistant ambush-protected vehicle development has been given priority but all authorities agree that this will not replace the JLTV as it does not have the payload or versatility of the JLTV. Design requirements For the vehicle there are several general requirements that have been stipulated by the US Army and Marine Corps. These include: A 30kW generator to give sustained power with the engine running and when the vehicle is moving A trailer capable of carrying the same payload as the vehicle at speed with reliability to match Ammo-carrying capacity: each JLTV will have capacity to carry two cans of M16 ammo, one can of M203, four cans of M249 and six cans of either MK19, M2, or M60 / M240 ammo Jam-resistant doors for easy escape after attack or damage An automatic fire-extinguishing system, a extra spall liner to minimise the effect of perforation after small-arms attack Two armour configurations (A and the enhanced level B) for protection against mines, artillery and RPG warheads Two run-flat tyres Systems to keep going after small arms attacks to systems such as fuel tank, coolant tank, or engine oil reservoir Electronic monitoring to diagnose equipment and system failures so that they can be fixed

No comments:

Post a Comment